GATE Exam Questions - Download GATE Exam Questions [Civil Engineering]

GATE Exam Questions - Download GATE Exam Questions [Civil Engineering]

The Graduate Aptitude Test in Engineering (GATE) is an examination that primarily tests the comprehensive understanding of various undergraduate subjects in engineering and science. GATE is conducted jointly by the Indian Institute of Science and seven Indian Institutes of Technology (Bombay, Delhi, Guwahati, Kanpur, Kharagpur, Madras and Roorkee) on behalf of the National Coordination Board – GATE, Department of Higher Education, Ministry of Human Resources Development (MHRD), Government of  India.

#Wikipedia

1.
The number of simultaneous equations to be solved in the slope deflection method, is equal to :
A. the degree of statical indeterminacy
B. the degree of kinematic indeterminacy
C. the number of joints in the structure
D. none of the above.

Ans. C

2.
Maximum size of a fillet weld for a plate of square edge is
A. 1.5 mm less than the thickness of the plate
B. one half of the thickness of the plate
C. thickness of the plate itself
D. 1.5 mm more than the thickness of the plate

Ans. A

3.
The treatment that should be given to the water from a deep tube well is :
A. pre-settling only
B. coagulation and flocculation only
C. filtration only
D. disinfection only

Ans. D

4.
On sag (or valley) curves the available sight distance is determined based on :
A. design speed
B. height of obstacle
C. height of driver eye
D. night-time driving conditions

Ans. C

5.
In a steady radial flow into an intake, the velocity is found to vary as (1/r2), where r is the radial distance. The acceleration of the flow is proportional to
A. 1/r5
B. 1/r3
C. 1/r4
D. 1/r

Ans. A