Great Civineers! Get Civil Engineering Tutorials, Multiple choice questions MCQs, Books.

Monday 23 October 2017

2500 Solved Problems in Fluid Mechanics and Hydraulics | Download



2500 Solved Problems in Fluid Mechanics and Hydraulics | Download 


2500 Solved Problems in Fluid Mechanics and Hydraulics | Download

2500 Solved Problems in Fluid Mechanics and Hydraulics | Download

Download link is here.

https://drive.google.com/file/d/0B4qXzWCfVI2zcFdNTGxkZjQ5Ync/view?usp=drivesdk

Share:

Saturday 14 October 2017

Fluid Mechanics | Question Bank | Interview Questions [Answers Here] - Part 3

Fluid Mechanics | Question Bank | Interview Questions [Answers Here] - Part 3

Another Part of the Fluid Mechanics Question Bank, Interview Question and Answers. In this part, there are 10 questions. Kindly go through them.
If you have not seen part 1 and 2, Click on the link below respectively:


31. A right circular cylinder open at the top is filled with liquid and rotated about its vertical axis at such a speed that half the liquid spills out, then the pressure intensity at the centre of bottom is
a) zero
b) one-fourth  its  value when  cylinder was full
c) one-half its value when cylinder was full
d) cannot be predicted from the given data
Ans: a

32. The horizontal component of force on a curved surface is equal to the
a) product of pressure intensity at its centroid and area
b) force on a vertical projection of the curved surface
c) weight of liquid vertically above the curved surface
d) force on the horizontal projection of the curved surface
Ans: b

33. A closed tank containing water is moving in a horizontal direction along a straight line at a constant speed. The tank also contains a steel ball and a bubble of air. If the tank is decelerated horizontally, then
i)    the ball will move to the front 
ii)   the bubble will move to the front 
iii) the ball will move to the rear 
iv)  the bubble will move to the rear Find out which of the above statements are correct ?
a) (i) and (ii)
b) (i)and(iv)
c) (ii) and (iii)
d) (iii) and (iv)
Ans: b

34. The eddy viscosity for turbulent flow is
a) a function of temperature only
b) a physical property of the fluid.
c) dependent on the flow
d) independent of the flow
Ans: c

35. Flow at constant rate through a tapering pipe is
i) steady flow
ii) uniform flow
iii) unsteady flow
iv) non-uniform flow
The correct answer is
a) (i) and (ii)
b) (i)and(iv)
c) (ii) and (iii)
d) (ii) and (iv)
Ans: b
36. In a two dimensional incompressible steady flow around an airfoil, the stream lines are 2 cm apart at a great distance from the airfoil, where the velocity is 30 m/sec. The velocity near the airfoil, where the stream lines are 1.5 cm apart, is
a) 22.5 m/sec.
b) 33 m/sec.
c) 40 m/sec.
d) 90 m/sec.
Ans: c

38. When the velocity distribution is uniform over the cross-section, the correction factor for momentum is
a) 0
b) 1
c) 4/3
d) 2
Ans: b

39. Least possible value of correction factor for
i) kinetic energy is zero
ii) kinetic energy is 1
iii) momentum is zero
iv) momentum is 1
The correct statements are
a) (i) and (iii)
b) (ii) and (iii)
c) (i) and (iv)
d) (ii) and (iv)
Ans: d

40. If the velocity is zero over half of the cross-sectional area and is uniform over the remaining half, then the momentum correction factor is
a) 1
b) 4/3
c) 2
d) 4
Ans: c

Searches related to fluid mechanics questions and answers


fluid mechanics questions and answers solution for graduates
fluid mechanics question bank pdf
fluid mechanics multiple choice questions and answers pdf

fluid mechanics interview questions and answers
fluid mechanics mcq with answers pdf
mcq on bernoulli equation
Share:

Fluid Mechanics | Question Bank | Interview Questions [Answers Here] - Part 2

Fluid Mechanics | Question Bank | Interview Questions [Answers Here] - Part 2

This is the part 2 of the Questions on Fluid Mechanics | Question Bank | Interview Questions. The answers are also provided and attached to the questions. If you did not see the part 1, click HERE.

Study the below Fluid Mechanics Questions and Answers and be familiar with the questions.

21. Centre of buoyancy always
a) coincides with the centre of gravity
b) coincides with the centroid of the volume of fluid displaced
c) remains above the centre of gravity
d) remains below the centre of gravity
Ans: b

22. If the weight of a body immersed in a fluid exceeds the buoyant force, then the body will
a) rise until its weight equals the buoyant force
b) tend to move downward and it may finally sink
c) float
d) none of the above
Ans: b

23. Metacentric height for small values of angle of heel is the distance between the
a) centre of gravity and centre of buoyancy
b) centre of gravity and metacentre
c) centre of buoyancy and metacentre
d) free surface and centre of buoyancy
Ans: b

24. A floating body is said to be in a state of stable equilibrium
a) when its metacentric height is zero
b) when the metacentre is above the centre of gravity
c) when the metacentre is below the centre of gravity
d) only when its centre of gravity is below its centre of buoyancy
Ans: b

25.   The increase in metacentric height
i)    increases stability
ii)   decreases stability
iii) increases comfort for passengers
iv) decreases comfort for passengers
The correct answer is
a)    (i) and (iii)
b) (i)and(iv)
c) (ii) and (iii)
d) (ii) and (iv)
Ans: b

26. A rectangular block 2 m long, 1 m wide and 1 m deep floats in water, the depth of immersion being 0.5 m. If water weighs 10 kN/m3, then the weight of the block is
a) 5kN
b) lOkN
c) 15 kN
d) 20 kN
Ans: b

27. The point in the immersed body through which the resultant pressure of the liquid may be taken to act is known as
a) centre of gravity
b) centre of buoyancy
c) centre of pressure
d) metacentre
Ans: c

28. If a vessel containing liquid moves downward with a constant acceleration equal to 'g' then
a) the  pressure  throughout the  liquid mass is atmospheric
b) there will be vacuum in the liquid
c) the pressure in the liquid mass is greater than hydrostatic pressure
d) none of the above
Ans: a

29. When a liquid rotates at a constant angular velocity about a vertical axis as a rigid body, the pressure intensity varies
a) linearly with radial distance
b) as the square of the radial distance
c) inversely as the square of the radial distance
d) inversely as the radial distance
Ans: b

30. An open cubical tank of 2 m side is filled with water. If the tank is rotated with an acceleration such that half of the water spills out, then the acceleration is equal to
a) g/3
b) g/2
c) 2g/3
d) g
Ans: d


Searches related to fluid mechanics questions and answers


fluid mechanics questions and solutionsfluid mechanics questions and answers solution for graduates
fluid mechanics question bank pdf
fluid mechanics multiple choice questions and answers pdf
 
fluid mechanics interview questions and answers
fluid mechanics mcq with answers pdf
fluid mechanics and hydraulic machines objective Questions
mcq on bernoulli equation


Share:

Fluid Mechanics | Question Bank | Interview Questions [Answers Here] - Part 1

Fluid Mechanics | Question Bank | Interview Questions [Answers Here] - Part 1

You will find these fluid Mechanics Questions and Answers friendly. It is always good to practice enough questions before going into the examinaition hall. All theses questions we have provided here will help you alot in GATE Preparation, Other interview questions, and other Engineering Examinations.

Please take time to go through all these questions.


1. Pascal-second is the unit of
a) pressure
b) kinematic viscosity
c) dynamic viscosity
d) surface tension
Ans: c

2. An ideal fluid is
a) one which obeys Newton's law of viscosity
b) frictionless and incompressible
c) very viscous
d) frictionless and compressible
Ans: b

3. The unit of kinematic viscosity is
a) gm/cm-sec2
b) dyne-sec/cm2
c) gm/cm2-sec
d) cm2/sec
Ans: d

4. If the dynamic viscosity of a fluid is 0.5 poise and specific gravity is 0.5, then the kinematic viscosity of that fluid in stokes is
a) 0.25
b) 0.50
c) 1.0
d) none of the above
Ans: c

5.     The viscosity of a gas
a) decreases with increase in temperature
b) increases with increase in temperature
c) is independent of temperature
d) is independent of pressure for very high pressure intensities
Ans: b

6.       Newton's law of viscosity relates
a)    intensity of pressure and rate of angular deformation
b) shear stress and rate of angular de¬formation
c) shear stress, viscosity and tempe¬rature
d) viscosity and rate of angular defor¬mation
Ans: b

7. An open tank contains 1 m deep water with 50 cm depth of oil of specific gravity 0.8 above it. The intensity of pressure at the bottom of tank will be
a) 4 kN/m2
b) 10 kN/m2
c) 12 kN/m2
d) 14 kN/m2
Ans: d

8. The position of centre of pressure on a plane surface immersed vertically in a static mass of fluid is
a) at the centroid of the submerged area
b) always above the centroid of the area
c) always below the centroid of the area
d) none of the above
Ans: c

9.     The total pressure on a plane surface inclined at an angle 9 with the horizontal is equal to
a) PA
b) pA sin 9
c) pA cos 9
d) pA tan 9
where p is pressure intensity at centroid of area and A is area of plane surface.
Ans: a

10. A vertical rectangular plane surface is submerged in water such that its top and bottom surfaces are 1.5 m and 6.0 m res-pectively below the free surface. The position of centre of pressure below the free surface will be at a distance of
a) 3.75 m
b) 4.0 m
c) 4.2m
d) 4.5m
Ans: c


Searches related to fluid mechanics questions and answers

fluid mechanics questions and solutionsfluid mechanics questions and answers solution for graduates
fluid mechanics question bank pdf
fluid mechanics multiple choice questions and answers pdf
fluid mechanics interview questions and answers
fluid mechanics mcq with answers pdf
fluid mechanics and hydraulic machines objective Questions
mcq on bernoulli equation
Share:

Contact Form

Name

Email *

Message *

Popular Posts

Blog Archive