Fluid Mechanics | Question Bank | Interview Questions [Answers Here] - Part 1

Fluid Mechanics | Question Bank | Interview Questions [Answers Here] - Part 1

You will find these fluid Mechanics Questions and Answers friendly. It is always good to practice enough questions before going into the examinaition hall. All theses questions we have provided here will help you alot in GATE Preparation, Other interview questions, and other Engineering Examinations.

Please take time to go through all these questions.

1. Pascal-second is the unit of
a) pressure
b) kinematic viscosity
c) dynamic viscosity
d) surface tension
Ans: c

2. An ideal fluid is
a) one which obeys Newton's law of viscosity
b) frictionless and incompressible
c) very viscous
d) frictionless and compressible
Ans: b

3. The unit of kinematic viscosity is
a) gm/cm-sec2
b) dyne-sec/cm2
c) gm/cm2-sec
d) cm2/sec
Ans: d

4. If the dynamic viscosity of a fluid is 0.5 poise and specific gravity is 0.5, then the kinematic viscosity of that fluid in stokes is
a) 0.25
b) 0.50
c) 1.0
d) none of the above
Ans: c

5.     The viscosity of a gas
a) decreases with increase in temperature
b) increases with increase in temperature
c) is independent of temperature
d) is independent of pressure for very high pressure intensities
Ans: b

6.       Newton's law of viscosity relates
a)    intensity of pressure and rate of angular deformation
b) shear stress and rate of angular de¬formation
c) shear stress, viscosity and tempe¬rature
d) viscosity and rate of angular defor¬mation
Ans: b

7. An open tank contains 1 m deep water with 50 cm depth of oil of specific gravity 0.8 above it. The intensity of pressure at the bottom of tank will be
a) 4 kN/m2
b) 10 kN/m2
c) 12 kN/m2
d) 14 kN/m2
Ans: d

8. The position of centre of pressure on a plane surface immersed vertically in a static mass of fluid is
a) at the centroid of the submerged area
b) always above the centroid of the area
c) always below the centroid of the area
d) none of the above
Ans: c

9.     The total pressure on a plane surface inclined at an angle 9 with the horizontal is equal to
a) PA
b) pA sin 9
c) pA cos 9
d) pA tan 9
where p is pressure intensity at centroid of area and A is area of plane surface.
Ans: a

10. A vertical rectangular plane surface is submerged in water such that its top and bottom surfaces are 1.5 m and 6.0 m res-pectively below the free surface. The position of centre of pressure below the free surface will be at a distance of
a) 3.75 m
b) 4.0 m
c) 4.2m
d) 4.5m
Ans: c

Searches related to fluid mechanics questions and answers

fluid mechanics questions and solutionsfluid mechanics questions and answers solution for graduates

fluid mechanics question bank pdf

fluid mechanics multiple choice questions and answers pdf

fluid mechanics interview questions and answers

fluid mechanics mcq with answers pdf

fluid mechanics and hydraulic machines objective Questions

mcq on bernoulli equation